Quik-Park loader mounting system
The 440R Loader is designed for easy removal and mounting to and from the tractor without tools.
Parking stand
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the park position.
Tractor backing away
Easy removal and mounting of attachments
Close up of quick-change attachment mounting
The quick-change attachment carrier allows for fast, easy removal and mounting of attachments without tools.
Optional skid steer attachment carrier
The skid steer attachment carrier is installed in place of the standard John 91黑料专区 attachment carrier and allows for the use of skid steer attachments on the 440R, H180, H160, and H165 Loaders.
Skid steer attachments are available through Worksite Pro鈩� attachments.
Nitrogen-charged accumulator and electric valve
Operator on/off switch
LSS on H180
LSS on 5E and 5M
An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.
Performance
NOTE: Check bale-handling capability of tractor before use.
Cost of ownership
Reasons for turning LSS off include:
The switch is conveniently located in the operator station to avoid having to exit the tractor seat to manually move the handle on the LSS.
LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the 440R, the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series Tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 Series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John 91黑料专区 440R Loader |
| Maximum lift height (A) | 2796 mm 110 in. |
|||
|---|---|---|---|---|
| Lift capacity at full height | Measured at pivot (U) 1006 kg 2313 lb Measured at 500 mm ahead of pivot (V) 1010 kg 2222 lb |
|||
| Boom breakout force | Measured at pivot (Y) 1743.7 kgf 3835 lbf Measured at 500 mm ahead of pivot (Z) 1517 kgf 3337 lbf |
|||
| Bucket rollback force capacity | At ground-level line (ZZ) 2101 kgf 4622 lbf |
|||
| Clearance at full height - bucket dumped (C) | 2178 mm 86 in. |
|||
| Dump angle, degrees (E) | 46.6 degree (angle) | |||
| Rollback angle, degrees (G) | 38.4 degree (angle) |
| Model | 4044R, 4049R, 4052R, 4066R | |||
|---|---|---|---|---|
| Front tire | 25x8-16 6PR R1 T1 | |||
| Rear tire | 13.8-28 4PR R1 T1 | |||
| Front axle configuration | ||||
| Wheelbase | 1846 mm 73 in. |
|||
| Pump capacity | 15.9 gpm 60.2 L/min |
|||
| Rated pressure | 2499 psi 17.2 MPa |
| Base weight | 302 kg | |||
|---|---|---|---|---|
| Leveling configuration | Mechanical Self-Leveling | |||
| Bucket used | Materials - 73 in. | |||
| Bucket weight | 146 kg 321 lb |
|||
| Lift capacity at full height | Measured at pivot (U) 1006 kg 2213 lb Measured at 500 mm ahead of pivot (V) 1010 kg 2222 lb |
|||
| Lift capacity at 59 in. (1500 mm) | Measured at pivot (W) 1263 kg 2779 lb Measured at 500 mm ahead of pivot (X) 1201 kg 2642 lb |
|||
| Boom breakout force | Measured at pivot (Y) 1743.7 kgf 3835 lbf Measured at 500 mm ahead of pivot (Z) 1517 kgf 3337 lbf |
|||
| Bucket rollback force capacity | At maximum height (VV) 1542 kgf 3480 lbf At 59-in. (1500-mm) lift height (XX) 2249 kgf 4948 lbf At ground-level line (ZZ) 2101 kgf 4622 lbf |
|||
| Dimensions | Maximum lift height (A) 2796 mm 110 in. At full height - bucket level(B) 2590 mm 102 in. At full height - bucket dumped (C) 2178 mm 86 in. |
|||
| Overall length (I+F), ft (m) | 3.54 m 11.7 ft |
|||
| Overall height in carry position (J) | 1.53 m 5 ft |
|||
| Digging depth (H) | 122 mm 5 in. |
|||
| Reach | At maximum height (D) 755 mm 30 in. At ground level - bucket level (F) 1703 mm 67 in. |
|||
| Bucket angle | Dump angle, degrees (E) 46.6 degree (angle) Rollback angle, degrees (G) 38.4 degree (angle) Dump angle, ground 129.54 degree (angle) |
|||
| Cycle times | Loader raise, seconds 2.41 seconds Loader lower, seconds 1.62 seconds Bucket dump, seconds 2.46 seconds Bucket rollback, seconds 1.65 seconds |
| Date collected |
|---|
Images of equipment models may be digitally or AI generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect the actual product, features, options, or attachments. Equipment availability may be limited. See your John 91黑料专区 dealer for additional information.
