Operator inside the cab
Smarter setup + cleaner turns: New model year 2027 technology brings Intelligent Initial Settings and ATTA Flex Knife Lockout.
Harvesting efficiency starts with two critical moments:
Model year 2027 introduces two intelligent features that make both moments easier, faster, and more productive.
Benefit: Start harvesting sooner and with confidence.
IIS gets you into the sweet spot from pass one鈥攕o your first hour looks like your best hour.
X9 Combine harvesting small grain
Benefit: Every turn counts鈥攌eep more crop in the tank.
Smarter turns mean less loss and more profit.
Field test validation with PAMI against CLAAS庐 and MacDon
Field test validation with PAMI against CLAAS and MacDon
John 91黑料专区 hinged drapers were engineered, designed, and built for reducing canola grain loss when paired with an X9 or S700 Combine. John 91黑料专区 contracted with the Prairie Agricultural Machinery Institute (PAMI) to independently test, validate, and quantify full header loss advantage against CLAAS and MacDon, and the hinged drapers proved a $3.00 CAD ($2.40 USD)* per acre grain loss advantage over the MacDon FD145. Based on an internal survey of producers who used the HDR Draper head in last year鈥檚 demo season, 97 percent had a positive experience around total canola grain loss.
*NOTE: Per acre advantage based on the following inputs:
MacDon is a trademark of MacDon Industries Ltd. CLAAS is a trademark of CLAAS KGaA mbH.
X Series Combine with 50-ft (15.2-m) Hinged Draper
Harvest acres faster than ever before with a 50-ft (15.2-m) John 91黑料专区 Hinged Draper built off the 700D and 700FD Drapers鈥� proven foundation.
X Series Combine with 50-ft (15.2-m) Hinged Draper
John 91黑料专区 HDR and HDF Drapers follow the ground by pivoting, gliding, and flexing over uneven fields to provide the best cut possible.
MacDon is a trademark of MacDon Industries Ltd.
X Series Combine with 50-ft (15.2-m) draper
The goals for harvest are simple 鈥� harvest on time and put more grain in the tank. The John 91黑料专区 HDR and HDF Drapers not only harvest more bushels per hour and acres per day but capture more crops along the way.
MacDon is a trademark of MacDon Industries Ltd.
| Specifications | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John 91黑料专区 HDF35 Hinged Frame, Flexible Cutterbar Draper |
| Cutterbar length | 10.7 m 35 ft |
|||
|---|---|---|---|---|
| Knife drive | Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in. |
|||
| Knife speed | X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min |
|||
| Pickup reel operating speeds | 8-70 rpm | |||
| Draper belts speed control | Hydraulic from cab (side belts only) |
| Type | Hinged frame flexible cutterbar |
|---|
| Type | Straight-line knife drive system | |||
|---|---|---|---|---|
| Length | 10.7 m 35 ft |
|||
| Knife drive | Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in. |
|||
| Knife speed | X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min |
|||
| Cutterbar tilt | ||||
| Base skid shoe height | 3.8 cm 1.5 in. |
| General | ||||
|---|---|---|---|---|
| Number of slats | Base: six bat poly Optional: steel tine |
|||
| Fingers | Base: nylon Optional: steel |
|||
| Diameter | 106.7 cm 42 in. |
|||
| Height control | Hydraulic | |||
| Speed control | Hydraulic | |||
| Reel lift | Off the cutterbar: 100.6 cm 39.6 in. |
|||
| Reel fore and aft | Fore of the cutterbar: 26.4 cm 10.4 in. |
|||
| Fore of the cutterbar | ||||
| Reel resume | Base | |||
| Reel reverse | Base | |||
| Operating speeds | 8-70 rpm | |||
| Operating speeds (54-in. reel) |
| Number of slats | ||||
|---|---|---|---|---|
| Diameter | ||||
| Height control | ||||
| Speed control | ||||
| Operating speeds |
| Width | Side belts: 4.4 m 14.3 ft Center belts: 200 cm 79 in. |
|||
|---|---|---|---|---|
| Belt depth | 100 cm 39.8 in. |
|||
| Cleat height | Cross belt cleat height: 19 mm 0.75 in. |
|||
| Operating speed | ||||
| Speed control | Hydraulic from cab (side belts only) | |||
| Center belt reverse | Base |
| Diameter | 40.6 cm 16 in. |
|||
|---|---|---|---|---|
| Feed drum fingers | Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in. |
|||
| Number of fingers | 18 | |||
| Auger finger platform | Triple chevron, retracting | |||
| Finger reach | 152 mm 6 in. |
|||
| Drum/auger reverse | Base | |||
| Operating speed | Low speed: 200 rpm High speed: 240 rpm |
|||
| Center cleanout door | Base |
| Type | Electrohydraulic | |||
|---|---|---|---|---|
| Header height sensing on the ground | Base | |||
| Header height sensing off the ground | Base |
| Type | Optional: hydraulic drive 250-350 rpm |
|||
|---|---|---|---|---|
| Fingered augers | Optional | |||
| Size | Diameter: 43.2 cm 17 in. |
| Platform length | 11.5 m 37.8 ft |
|||
|---|---|---|---|---|
| Overall operating depth | With dividers: 3.2 m 10.6 ft |
|||
| Transport width, field position | ||||
| Transport width on wheel, less dividers | ||||
| Transport length, hitch extended |
| Approximate weight |
|---|
| Date collected | 24 Mar 2021 |
|---|
Images of equipment models may be digitally or AI generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect the actual product, features, options, or attachments. Equipment availability may be limited. See your John 91黑料专区 dealer for additional information.