FA 20 HydraFlex鈩� Cutting Platform | Grain Harvesting

HydraFlex鈩� float system improves operator control

The HydraFlex system hydraulically controls the float of the cutterbar by a simple turn of a knob in the cab. This provides exceptional cutterbar flexibility throughout the entire working pressure range. Higher ground speeds can be accomplished with HydraFlex, compared to the conventional float systems.

Feature benefit:

The mechanical linkage is replaced by float arms with hydraulic cylinders at every channel. These cylinders provide the cutterbar with the ability to float over uneven ground conditions with improved operator control. Reference the operator鈥檚 manual for settings recommendations.

NOTE: The hydraulic cylinders will be on every other channel on FA30 and FA30 models in model year 2022.

The platform HydraFlex system with an accumulator maintains a constant ground pressure over changing ground conditions. Manual mode is for locking out the cutterbar in the rigid mode.

Float arms

Hydraulic cylinders at every channel

Functionality

In automatic mode, the operator sets a desired cutterbar ground pressure, and the system will maintain this setting. If a different set point is desired, the operator adjusts the encoder on the armrest board, and an updated cutterbar float pressure reading will be shown on the cornerpost display. For increased ground following in uneven terrain, decrease cutterbar pressure to make the cutterbar heavy to the ground. If soil pushing occurs, increase the cutterbar pressure to make the cutterbar lighter to the ground.

Epicyclic knife drive increases drive capacity

The heavy-duty epicyclic knife drive gearbox provides an enhanced knife-drive system that increases drive capacity with less vibration and improved reliability.

Feature benefit:

Provides high level of reliability and durability
Minimizes vibration
Fast, efficient cutting action for higher harvesting speeds

Epicyclic knife-drive gearbox

Functionality:

89-mm (3.5-in.) knife stroke adds a more efficient cutting action. The increased stroke improves the cutterbar's ability to cut even in adverse conditions, such as large-stemmed crops or weeds, without plugging.
Knife speed is 520 rpm.
Reliability is improved with an in-line versus wobble-geometry knife head, which oscillates in a straight line and not through a radius like the previous knife drive.
Knife head and gearbox attachment are improved. Two cap screws can be easily removed if any service to the knife is required.

Enhanced single-point latching system is fast and easy

Enhanced single-point latching system

John 91黑料专区鈥檚 single-point header latching system provides combine operators a fast and easy method for connecting all front-end equipment. One easy motion of the lever connects the electrical and hydraulic circuits along with header retaining pins.

Feature benefit:

Reduces the time required to change over headers
No tools required to remove headers for transport or storage

Functionality:

The enhanced single-point latching system, includes a valve assembly mounted to all platform and corn head back sheets. These assemblies include an orifice valve unique to the header type and a pressure override valve. Together, these valves ensure the performance and reliability of header hydraulic functions.

Overall width	6.6 m 21.7 ft
Cutterbar length	6.1 m 20 ft
Flex cutterbar float range	152 mm 6 in.
Tilt adjustment	Located on feederhouse: 17 degree (angle)
Height control	Hydraulic
Speed control	Hydraulic

Type	Knife system with in-line gearbox: 102 mm 4 in.
Cutterbar angle	10 degree (angle)
Cutterbar length	6.1 m 20 ft
Flex cutterbar float range	152 mm 6 in.
Tilt adjustment	Located on feederhouse: 17 degree (angle)
Knife sections	Heavy-duty, over-serrated
Guards	Forged steel, heat-treated
Backshaft speed	490 rpm
Knife speed	520 cycles/min

Diameter	66 cm 26 in.
Operating speed	Slow down: 135, 152 rpm Speed up: 170 rpm

Number for slats	Six
Diameter	1.067 m 3.5 ft

Height control	Hydraulic
Speed control	Hydraulic
Operating speeds	6 to 44 rpm

91黑料专区