120Drawn Flail Shredder
- Front rubber deflectors
- Heavy-duty gearbox
- Steel rotor bearings
- Convenient rear grease fittings
Features
Expand AllCollapse All
Drawn tractor hookup
The 100 Series Flail Shredder is available with a drawn tractor hookup.
Rubber deflectors
Front rubber deflectors keep debris and other materials under the shredder and away from the tractor and operator. Because they are made out of rubber, they will not dent or rust.
Gearbox
Rotor bearings
Drawn tractor hookup
Drawn tractor hookup
Rubber deflectors will not dent or rust
Rubber deflectors
Heavy-duty John 91黑料专区-designed gearbox
Gearbox
A heavy-duty gearbox transfers power to the power-band drive belts through cross shafts with intermediate bearing supports:
- Gearbox has a constant-duty rating of 150 hp and a maximum rating of 225 hp.
Steel rotor bearings for increased bearing life
Rotor bearings
The rotor bearings are now made of steel and have a three-lip seal to keep the dirt out and increase the life of the bearings.
The side and center bearings now have guards in order to avoid leaks and dust, increasing the life of the bearings.
Specifications
Add Model
| Specifications | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John 91黑料专区 120 Drawn Flail Shredder |
Power requirements
| Tractor PTO hp range | 67-200 kW 90-200 hp |
|||
|---|---|---|---|---|
| Tractor RPM | 1,000 rpm | |||
| Gear case |
Knives
| Number of knives | 160 | |||
|---|---|---|---|---|
| Knife dimensions | ||||
| Knife mounting system | 7.87 x 63.5 x 143 mm 0.31 x 2.5 x 5.63 in. |
|||
| Type | Heat-treated, reversible, side-slicer, hard-faced, tungsten-carbide knives optional | |||
| Knives overlap | ||||
| Tip speed | 171 km/h 106 mph |
Rotor
| Rotor speed | 1,500 rpm | |||
|---|---|---|---|---|
| Rotor diameter | 139.7 mm 5.5 in. |
|||
| Rotor bearing | Sealed, self-aligning; piloted housing, auxiliary seals, and grease cavities | |||
| Bearing size | 41.15 mm 1.62 in. |
Drivetrain
| Belts | Power-band, triple 5VX | |||
|---|---|---|---|---|
| PTO drivelines |
Mainframe
| Hitch | Drawn | |||
|---|---|---|---|---|
| Hood thickness | 6.35 mm 1/4 in. |
|||
| Safety deflector | Yes | |||
| Gauge wheels | 7.60-15 infinitely adjustable row spaces | |||
| Warning lights |
Cutting capacity
| Cutting width | 6.1 m 20 ft |
|||
|---|---|---|---|---|
| Cutting height | 7.6 to 25.4 cm 3 to 10 in. |
Dimensions
| Transport width | 2.4 m 7.8 ft |
|||
|---|---|---|---|---|
| Transport length | 7.3 m 24.1 ft |
|||
| Weight | 2,100 kg 4,630 lb |
Optional equipment
| Easy transport | Yes | |||
|---|---|---|---|---|
| Constant velocity joint driveline | Yes | |||
| Skid shoes |
Additional information
| Date collected |
|---|
Accessories and Attachments
Expand AllCollapse All
Endwise transport
Field position
Transport position
Steel deflectors
Rubber deflectors
Additional gauge wheel
Warning lights
Center divider
Easy End Transport
Easy-End Transport - BP18092
Endwise transport
An easy-end transport system is available as an attachment on the 520 Flail Shredder for more convenient transport positioning.
The attachment includes two additional arms, one for the front and one for the rear of the machine:
- Reduces the time it takes to prepare the machine for endwise transport
- Allows the arms to be left on for normal field operation
- Not compatible with the disk hitch attachment
- Transport width of less than 8 ft
Field position
Transport position
Transport arms are pinned in the down position for transport and pinned up during field operation.
Miscellaneous
Deflectors - Steel - BP16572
Steel deflectors
Rubber deflectors
Deflectors can be used on the front of the shredder to prevent cut material from being thrown forward. Rubber deflectors are recommended when shredding in rocky areas.
Gauge Wheel Support - BP17320
Additional gauge wheel
Additional gauge wheels can be ordered, if needed, for improved cutting performance.
Safety Warning Light - BP18226
Warning lights
Transport warning lights are standard on the 520 Integral Flail Shredder and optional on the 520 Drawn Flail Shredder.
Weed Separator
Weed Separator (Center Divider) - BP16573
Center divider
The center divider minimizes the center strip of uncut material when clipping grass, idle acres, or non-row-crop crops.
This bundle is for use on all shredders with the following serial numbers:
-
115 Flail Shredder (serial numbers 002485 and above)
-
118 Flail Shredder (serial numbers 002072 and above)
-
120 Flail Shredder (serial numbers 002258 and above)
NOTE: Previous machines did not have center-cut knives. To install, order them from Parts.
Shop and Buy
Maintenance and Support
You May Also Be Interested In
Images of equipment models may be digitally or AI generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect the actual product, features, options, or attachments. Equipment availability may be limited. See your John 91黑料专区 dealer for additional information.