Cargadora FrontalH310 MSL
- Sistema de auto nivelaci贸n Cargador compatible con diferentes familias de Tractores.
- Soporte Universal (Global Carrier).
- Mayor altura de levante.
- L铆neas de aceite ocultas para una mayor protecci贸n y visibilidad.

Los Brazos de Levante de los Cargadores maximizan la visibilidad del operador mientras que proporcionan la fuerza para soportar muchos a帽os de uso rudo. Es compatible con diferentes familias de tractores y cuenta con variedad de funciones hidr谩ulicas para una mayor productividad.
Conexi贸n hidr谩ulica de punto 煤nico en tractor serie 6 (posici贸n cerrada)
Conexi贸n hidr谩ulica de punto 煤nico en tractor serie 5 (posici贸n cerrada)
Los cargadores frontales 540M y H310 pueden configurarse con una conexi贸n hidr谩ulica de punto 煤nico que tambi茅n incorpora el punto de conexi贸n para cualquier necesidad el茅ctrica. Para desconectar la conexi贸n hidr谩ulica entre el cargador frontal y el tractor, es necesario aliviar la presi贸n de aceite del sistema hidr谩ulico del tractor.
Tuber铆as de aceite ocultas a trav茅s del brazo de la barra de pulverizaci贸n
Tuber铆as de aceite dirigidas a trav茅s del brazo de la barra de pulverizaci贸n
Tuber铆as de aceite dirigidas a trav茅s del tubo de torque
A lo largo del tiempo, la anchura incrementada en los cofres del tractor ha ocasionado problemas con el espacio disponible para operar las tuber铆as de aceite tradicionales de un cargador frontal a lo largo de la barra de pulverizaci贸n, haci茅ndolas m谩s susceptibles a da帽os.
Para mejorar esta situaci贸n, las tuber铆as de aceite han sido dirigidas a trav茅s del brazo de la barra de pulverizaci贸n y el tubo de torque mejorando la protecci贸n de la l铆nea y la apariencia del cargador frontal.
Pies de estacionamiento
Los cargadores frontales de John 91黑料专区 se quitan y reinstalan f谩cilmente en los tractores, sin necesidad de usar herramientas. El sistema de estacionamiento permite quitar o acoplar el cargador frontal al tractor en minutos, sin necesidad de herramientas.
Para quitar o estacionar el cargador frontal, aplique presi贸n ligera hacia abajo en el brazo del cargador con el cuchar贸n vac铆o a un 谩ngulo aproximado de 30 grados. Con el tractor en la posici贸n de estacionamiento, instale los pedestales de estacionamiento y coloque los pasadores del m谩stil en la posici贸n abierta.
Pedestal de estacionamiento en posici贸n de almacenamiento
Extracci贸n del pedestal de estacionamiento
Pasador de m谩stil en posici贸n cerrada
Girar el pasador del m谩stil a la operaci贸n abierta
Utilizando el circuito del brazo con el tractor en neutro, gire el m谩stil hacia delante hasta que 茅ste haya girado m谩s all谩 de la posici贸n del pasador en el bastidor de montaje; para ello extienda el cilindro de elevaci贸n. Ahora, mediante la utilizaci贸n del circuito del cuchar贸n, voltear hacia atr谩s el cuchar贸n hasta extraer el brazo de izado de la cavidad y se despejar谩n los neum谩ticos.
Pasador de m谩stil en posici贸n abierta
Los m谩stiles giran hacia adelante, luego el cuchar贸n se voltea hacia atr谩s
Con el tractor en estacionamiento, apague el motor y alivie la presi贸n hidr谩ulica como se indica en el tractor (girando el joystick). Desconecte o abra el conector hidr谩ulico de punto 煤nico (o extraiga los acopladores si no hay punto 煤nico instalado).
Desconecte/abra la conexi贸n hidr谩ulica de punto 煤nico
Desconecte/abra las conexiones hidr谩ulicas de punto 煤nico
Almacene el cargador frontal a la mitad del conector de punto 煤nico o las mangueras, y ret铆rese del cargador frontal.
Sistema hidr谩ulico de punto 煤nico desconectado
Cargador frontal estacionada
V谩lvula de cierre hidr谩ulico (posici贸n abierta)
V谩lvula de cierre hidr谩ulico (posici贸n cerrada)
Se incluye una v谩lvula de cierre hidr谩ulico con los cargadores frontales de la serie H y M para asegurar que el cargador frontal no se baje s煤bitamente. Por ejemplo, esto permite bloquear el brazo cuando se requiere que alguien se posicione debajo del brazo del cargador frontal para realizar alg煤n trabajo de mantenimiento. No se debe usar por per铆odos prolongados de tiempo a menos que tambi茅n se utilice un pedestal de soporte adecuado.
Cilindro con falso v谩stago
Los tiempos de ciclo r谩pidos del cuchar贸n son importantes para vaciar la carga del cuchar贸n lo m谩s r谩pido posible, (con mucha frecuencia) para ser lo m谩s productivo posible, mientras se completan las operaciones de carga. El dise帽o de cilindro del cuchar贸n puede tener un gran impacto en este tiempo de ciclo, en especial para los cargadores frontales con nivelaci贸n autom谩tica mec谩nica.
Por tanto, todos los cargadores frontales MSL de la Serie H y M utilizan cilindros de cuchar贸n de falso v谩stago. Un cilindro falso v谩stago tiene un menor requerimiento de desplazamiento de aceite en el extremo del cabezal del cilindro, lo cual permite a este cilindro descargar mucho m谩s r谩pido que un cilindro normal.
| Altura de elevaci贸n m谩xima | 3816 mm 150 in. |
|||
|---|---|---|---|---|
| Capacidad de elevaci贸n a altura completa | Medida en articulaci贸n 1667 kg 3674 lb 2636 kgf 5811 lbf |
|||
| Fuerza de salida de la pluma | ||||
| Capacidad de fuerza de retroacci贸n del cuchar贸n | En la l铆nea del nivel del suelo 4515 kgf 9954 lbf |
|||
| Separaci贸n a altura completa, con el cuchar贸n bajado | 2781 mm 110 in. |
|||
| 脕ngulo de vaciado | -53 grados (谩ngulo) | |||
| 脕ngulo de retroacci贸n | 42 grados (谩ngulo) |
| Esquema de especificaciones | Ver esquema |
|---|
| Modelo | 6J 4 cilindros | |||
|---|---|---|---|---|
| Neum谩ticos delanteros | 12.4R24 | |||
| Neum谩ticos traseros | 18.4R38 | |||
| Configuraci贸n del eje frontal | MDWD | |||
| Distancia entre ejes | 2400 mm 94.5 in. |
|||
| Capacidad de la bomba | 81 L/min 21 gpm |
|||
| Presi贸n nominal | 200 bar 2900 psi |
| Peso base | 1356.8 kg | |||
|---|---|---|---|---|
| Configuraci贸n de nivelaci贸n | Nivelaci贸n autom谩tica mec谩nica (MSL) | |||
| Cuchar贸n utilizado | Materiales de 1850 mm Materiales de 73 in. |
|||
| Peso del cuchar贸n | 236 kg 520 lb |
|||
| Capacidad de elevaci贸n a altura completa | Medida en articulaci贸n 1667 kg 3674 lb Medida a 800 mm por delante de la articulaci贸n 1827 kg 4026 lb |
|||
| Capacidad de elevaci贸n a 1500 mm (59 in.) | Medida en articulaci贸n 2150 kg 4738 lb Medida a 800 mm por delante de la articulaci贸n 2057 kg 4533 lb |
|||
| Fuerza de salida de la pluma | Medida en articulaci贸n 2636 kgf 5811 lbf Medida a 800 mm por delante de la articulaci贸n 2299 kgf 5067 lbf |
|||
| Capacidad de fuerza de retroacci贸n del cuchar贸n | A altura m谩xima 2270 kgf 5003 lbf A una altura de elevaci贸n 59 in. (1500 mm) 4396 kgf 9691.5 lbf En la l铆nea del nivel del suelo 4515 kgf 9954 lbf |
|||
| Dimensiones | Altura de elevaci贸n m谩xima 3816 mm 150 in. A altura completa, a nivel del cuchar贸n 3618 mm 143 in. A altura completa, con el cuchar贸n bajado 2781 mm 110 in. |
|||
| Longitud total | 4886 mm 193 in. |
|||
| Profundidad de excavado | -59 mm -2.3 in. |
|||
| Alcance | A altura m谩xima 953 mm 38 in. A nivel del suelo, nivel del cuchar贸n 2486 mm 98 in. |
|||
| 脕ngulo del cuchar贸n | 脕ngulo de vaciado -53 degree (angle) 脕ngulo de retroacci贸n 42 degree (angle) 脕ngulo de vaciado al suelo -94 degree (angle) |
|||
| Tiempos de ciclo | Elevaci贸n de cargadora 4.9 seconds Descenso de cargadora 3.6 seconds Volteo de cuchar贸n 3.8 seconds Retracci贸n de cuchar贸n 3.8 seconds |
|||
| Altura total en posici贸n de transporte |
| Fecha de la Informaci贸n |
|---|
Large ballast box is available to carry additional ballast for greater tractor stability.
Capacities |
|||
Weight |
Sand (Dry) |
Concrete |
Portland Cement |
BW15852 Large ballast box: |
|||
| Volume | 13.3 ft3 = 377L |
||
Material |
581 kg (1277 lb) |
871 kg (1915 lb) |
1089 kg (2395 lb) |
Empty box |
155 kg (342 lb) |
155 kg (342 lb) |
155 kg (342 lb) |
Total |
736 kg (1619 lb) |
1026 kg (2257 lb) |
1244 kg (2737 lb) |
BW15852 Large ballast box is compatible with Category 2 Quik-Couplers and Category 2 or 3 hitches.
See ''Rear Ballast Requirements'' for proper ballasting of the tractor.
General Purpose (GP) buckets
Materials bucket
Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.
NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.
This general-purpose bucket can be used in numerous applications.
The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.
Materials bucket
Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.
NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.
Replaceable wear edge
For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:
Replaceable wear edge
For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:
Five-tine round bale/silage grapple with grille
All compatible John 91黑料专区 Loaders use the same five-tine, pin-on grapple. The advantages of this grapple are:
High-performance operators will choose the five-tine grapple for its increased durability and load-carrying capacity. Advantages include:
The grapple is equipped with twin cylinders to provide excellent clamping force.
NOTE: The center tine of the five-tine grapple is slightly off center to avoid contact with the placement of optional digging teeth.
NOTE: The grapple is not compatible with materials or high-volume buckets.
1850-mm (73-in.) bale grapple bucket
73鈥搃n. (1850 mm) grapple bucket BW15358 shown (all one piece
The bale grapple bucket is a complete solution ideal for full loads of silage, handling bales, or cleaning up debris or manure.
Two function quick coupler
The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
Three function quick coupler
The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
The hood guard's basic function is to:
Compatibility:
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight bracket. This is so that the front weight bracket is the first point of contact against lower stationary objects.
Hood guard on 5100E Tractor
The hood guard鈥檚 basic function is to:
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
Hood guard for 5E 4-cylinder and 5M Series Tractors
Hood guard for 6D and 6E Series Tractors
The heavy-duty hood guard is compatible with 5E 4-cylinder, 5M, 6D, and 6E Tractors.
NOTE: See below for details on tractor family, series, and model years.
The basic function of a hood guard is to:
The hood guard:
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight bracket. This is so the front weight bracket is the first point of contact against lower stationary objects.
If a front weight bracket is not used, the lower bar can be moved downward to improve the protection of the grille below the lights.
The loader hoses are connected to the mid-tractor selective control valves (SCVs).
The loader hoses are connected to the mid-tractor selective control valves (SCVs).
The loader hoses are connected to the mid-tractor selective control valves (SCVs).
Two function quick coupler
The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
Three function quick coupler
The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
Single-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frame
The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
Single-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frame
The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
Single-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frame
The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
Single-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frame
The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
2-function hoses and couplers
Stationary fender (H480 shown)
Loader stationary fenders are highly recommended for those operating in conditions where the front axle will be in full oscillation and turn frequently or where tight turns are made while maneuvering through gates or obstacles that will catch tractor axle-mounted fenders.
The loader stationary fenders still provide coverage for debris from the tire, but they do not protrude to become damaged in operation. The fenders can be removed to enable better access for servicing as well.
Stationary fender (H480 shown)
Loader stationary fenders are highly recommended for those operating in conditions where the front axle will be in full oscillation and turn frequently or where tight turns are made while maneuvering through gates or obstacles that will catch tractor axle-mounted fenders.
The loader stationary fenders still provide coverage for debris from the tire, but they do not protrude to become damaged in operation. The fenders can be removed to enable better access for servicing as well.
Nitrogen-charged accumulator and electric valve
Operator on/off switch
LSS on H180
LSS on 5E and 5M
An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.
Performance
NOTE: Check bale-handling capability of tractor before use.
Cost of ownership
Reasons for turning LSS off include:
The switch is conveniently located in the operator station to avoid having to exit the tractor seat to manually move the handle on the LSS.
LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the 440R, the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series Tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 Series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.
Nitrogen-charged accumulator and electric valve
Operator on/off switch
LSS on H180
LSS on 5E and 5M
An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.
Performance
NOTE: Check bale-handling capability of tractor before use.
Cost of ownership
Reasons for turning LSS off include:
The switch is conveniently located in the operator station to avoid having to exit the tractor seat to manually move the handle on the LSS.
LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the 440R, the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series Tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 Series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.
Nitrogen-charged accumulator and electric valve
Operator on/off switch
LSS on H180
LSS on 5E and 5M
An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.
Performance
NOTE: Check bale-handling capability of tractor before use.
Cost of ownership
Reasons for turning LSS off include:
The switch is conveniently located in the operator station to avoid having to exit the tractor seat to manually move the handle on the LSS.
LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the 440R, the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series Tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 Series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.
Nitrogen-charged accumulator and electric valve
Operator on/off switch
LSS on H180
LSS on 5E and 5M
An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.
Performance
NOTE: Check bale-handling capability of tractor before use.
Cost of ownership
Reasons for turning LSS off include:
The switch is conveniently located in the operator station to avoid having to exit the tractor seat to manually move the handle on the LSS.
LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the 440R, the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series Tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 Series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.
Nitrogen-charged accumulator and electric valve
Operator on/off switch
LSS on H180
LSS on 5E and 5M
An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.
Performance
NOTE: Check bale-handling capability of tractor before use.
Cost of ownership
Reasons for turning LSS off include:
The switch is conveniently located in the operator station to avoid having to exit the tractor seat to manually move the handle on the LSS.
LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the 440R, the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series Tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 Series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.
5M mounting frame
5M mounting frame
6E Final Tier 4 (FT4)
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame
Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.
5M mounting frame
5M mounting frame
6E Final Tier 4 (FT4)
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame
Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.
Digging teeth can be added to the heavy-duty bucket. This feature allows for easier digging in hard ground or breaking loose hard-packed materials, such as manure or silage. Digging teeth are not compatible with replaceable cutting edges.