MT9Minimum-Till Ripper
- 9 standards
- Four stabilizer wheels
- Integral or drawn options*
- Extended wear standards deliver twice the life expectancy*
Features
Expand AllCollapse All
MT11 Drawn paired with 9RX 710 Tractor
MT Standards
Manage compaction faster
MT11 Drawn paired with 9RX 710 Tractor
MT Series Minimum Till Rippers are built to run at 4 鈥� 7 miles per hour behind today鈥檚 high horsepower tractors.
Rip 25 more acres per day with the MT11 compared to the previous 9 standard model. MT Series Rippers break-up deep compaction at depths up to 16 in. while minimizing topsoil disturbance.
Extended wear components lead to higher productivity
MT Standards
Extended wear standards deliver double the life expectancy compared to previous 2100 ripper models. The MT series delivers a highly productive and easy to set minimal maintenance solution to breaking up soil compaction. Spend less time changing components and more time working your ground.
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John 91黑料专区 MT9 Minimum-Till Ripper |
Key Specs
| Working width | 6.9 m 22.5 ft |
|||
|---|---|---|---|---|
| Transport width | 4.9 m 16 ft |
|||
| Operating depth | Maximum 40.6 cm 16 in. |
|||
| Miles per hour | 6.4-11.2 km/h 4-7 mph |
|||
| Horsepower per standard | 29.8-44.7 kW 40-60 hp |
|||
| Spacing between standards | 76.2 cm 30 in. |
Tool configuration
| Type | In-line ripper | |||
|---|---|---|---|---|
| Option 1 | ||||
| Option 2 | ||||
| Option 3 | ||||
| Option 4 | ||||
| Option 5 | ||||
| Option 6 | ||||
| Option 7 | ||||
| Option 8 | ||||
| Option 9 | ||||
| Option 10 | ||||
| Option 11 | ||||
| Option 12 | ||||
| Option 13 | ||||
| Option 14 | ||||
| Option 15 | ||||
| Option 16 | ||||
| Option 17 | ||||
| Option 18 | ||||
| Option 19 | ||||
| Option 20 | ||||
| Option 21 | ||||
| Option 22 |
Working width
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 | ||||
| Option 4 | ||||
| Option 5 | ||||
| Option 6 | ||||
| Option 7 | ||||
| Option 8 | ||||
| Option 9 | ||||
| Option 10 | ||||
| Option 11 | ||||
| Option 12 | ||||
| Option 13 | ||||
| Option 14 | ||||
| Option 15 | ||||
| Option 16 | ||||
| Option 17 | ||||
| Option 18 | ||||
| Option 19 | ||||
| Option 20 | ||||
| Option 21 | ||||
| Option 22 |
Transport width
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 | ||||
| Option 4 | ||||
| Option 5 | ||||
| Option 6 | ||||
| Option 7 | ||||
| Option 8 | ||||
| Option 9 | ||||
| Option 10 | ||||
| Option 11 | ||||
| Option 12 | ||||
| Option 13 | ||||
| Option 14 | ||||
| Option 15 | ||||
| Option 16 | ||||
| Option 17 | ||||
| Option 18 | ||||
| Option 19 | ||||
| Option 20 | ||||
| Option 21 | ||||
| Option 22 |
Operating depth
| Maximum | 40.6 cm 16 in. |
|---|
Frame
| Size | 152x152x9.5 mm 6x6x0.35 in. |
|||
|---|---|---|---|---|
| Maximum underframe clearance | 89 cm 35 in. |
Operating speed
| Miles per hour | 6.4-11.2 km/h 4-7 mph |
|---|
Horsepower required
| Horsepower per standard | 29.8-44.7 kW 40-60 hp |
|---|
Depth control
| Option 1 | 3-point hitch for integral | |||
|---|---|---|---|---|
| Option 2 | TruSet鈩� in-cab controls and single-point crank-adjust (on drawn models only) | |||
| Option 3 |
Hydraulic requirements
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | 1 SCV (fold) at 17,237 kPa 2,500 psi |
Hitch
| Options | Integral Optional: Drawn |
|||
|---|---|---|---|---|
| Three-point hitch requirements | Category 4N (with Quik-Coupler) | |||
| Pull-type description | Category 4 or 5 Hitch |
Standard options
| Spacing between standards | 76.2 cm 30 in. |
|||
|---|---|---|---|---|
| Option 1 | Trip force Shear-bolt: 3,265 kg 7,200 lb Standard type Straight with wear shin: 19 or 31.75 mm 0.75 or 1.25 in. Shear-bolt |
|||
| Option 2 | Trip force 1,451.5 kg 3,200 lb Trip height 30.5 cm 12 in. Standard type 19 mm 0.75 in. Cushion trip |
|||
| Option 3 | ||||
| Option 4 |
Ground-engaging components
| Options | Standard: 19 mm (0.75 in.) min-till point: 178 mm (7 in.) low-disturbance: 178 mm (7 in.), 254 mm (10 in.) ultra-low-disturbance: 63 mm (2.5 in.) Standard: 31.75 mm (1.25 in.) Regular: 57 mm (2.25 in.) Capped: 57 mm (2.25 in.) Double-capped: 57 mm (2.25 in.) LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.) |
|---|
Coulters
| Description | ||||
|---|---|---|---|---|
| Type | Spring cushion coulters | |||
| Pounds of force | Normal working load: 272.2 kg 600 lb Deflection of: 10.2 cm 4 in. Maximum trip load: 362.9 kg 800 lb Deflection of: 20.3 cm 8 in. |
|||
| Blades | Straight or rippled: 559x4.5 mm 22x0.1777 in. |
Closing wheel attachment
| Description | ||||
|---|---|---|---|---|
| Down force | 113.4 kg 250 lb |
|||
| Size | 10.2x40.6 cm 4x16 in. |
|||
| Spacing | 19.05 to 35.6 cm 7.5 to 14 in. |
|||
| Angle adjustments | 1 to 15 degree (angle) |
Stabilizer/gauge wheels
| Type | Four Stabilizer wheels | |||
|---|---|---|---|---|
| Wheels | 52.1x20.3 cm 20.5x8 in. |
|||
| Tires | 10 PR |
Pull-type wheels
| Description | VF320/70R15 Radial tire (with drawn hitch) | |||
|---|---|---|---|---|
| Additional feature | ||||
| Option 1 | ||||
| Option 2 | ||||
| Option 3 | ||||
| Option 4 |
Additional information
| Date collected |
|---|
-
2430CNutrient Applicator -
2510H with DryHigh-Speed Application with Dry Nutrient Attachment -
2510LLiquid Fertilizer Applicator -
2530LNutrient Applicator -
DA159T Dry Nutrient Attachment -
DA15for 9T Dry Nutrient Attachment
-
DA15Disk Applicator
-
DA169T Dry Nutrient Attachment
-
DA16for 9T Dry Nutrient Attachment
-
DA16Disk Applicator
-
DA23Disk Applicator
-
DH52F SeriesFolding Offset Disks -
HSD15High Speed Disk -
HSD19High Speed Disk -
HSD22High Speed Disk -
HSD25 2SHigh Speed Disk
Shop and Buy
Maintenance and Support
You May Also Be Interested In
* TruSet active is in base equipment with drawn option
* Compared to previous models
Product features are based on published information at the time of publication. Product features are subject to change without notice. Contact your local John 91黑料专区 dealer for more information.
Images of equipment models may be digitally or AI generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect the actual product, features, options, or attachments. Equipment availability may be limited. See your John 91黑料专区 dealer for additional information.